The transmission of your vehicle is a critical part because it allows your vehicle to change gears with no problems and it protects your engine. The engine and transmission are two car parts that you need to be mindful of maintaining to the best of your ability, so you need to make sure that you take it upon yourself to get the most of your transmission. With this in mind, follow these three tips in the article in order to keep your transmission up to par.
#1: Periodically Check Out Your Transmission Fluid
When you need to be sure that your transmission runs the way that it should, you will need to keep fluid maintenance as one of the most important factors. To check your fluid levels, let the engine run for a few minutes until it gets warm. From there, you should pull out the dipstick and check the levels to make sure that the fluid rests at or a little bit higher than the fill mark. Also make sure that the fluid has retained its color as opposed to turning black and burning out.
#2: Add A Few Helpful Extras
There are some extras that you can add to your transmission in order to get the best of it. Two ingredients you should install are a friction modifier and an auxiliary cooler. The friction modifier will give you plenty of longevity out of your transmission so that it survives the mileage that you put on it throughout the years. An auxiliary cooler will prevent your transmission from overheating, which can be detrimental not only to the part itself but also to the engine and the rest of your parts.
#3: Take Your Vehicle To The Transmission Shop For Professional Maintenance
When you really want your transmission to serve you through the years, the best thing you can do for yourself is reach out to a transmission repair shop, such as American Transmission Center, that can assist you. To get the most out of the transmission, you should get it serviced by a professional every 30,000 to 100,000 miles. This will include an inspection and a series of maintenance steps that will protect your system and allow it to thrive for a number of years. By leaving it into the hands of a pro, you can count on each working part surviving at its best.
Follow these three tips and use them to make the most of your transmission.